Ideal Blade Slitting For Swivel Blade Cable Stripper

Ideal Blade Slitting For Swivel Blade Cable Stripper Reviews

Other Picture

Ideal Blade Slitting For Swivel Blade Cable Stripper Feature

• For quick and easy cuts
• Blades adjust for insulation thickness up to 5/32"
• Strips PVC, rubber, neoprene, etc.

Makes center or end strips on most types of common cable, quickly and easily. Blades adjust for insulation thickness up to 5/32". Strips PVC, rubber, neoprene, etc. Replacement slitting blade. (USA)

Visit Store Now !!

Detail Products

Detail Reviews

Sep 15, 2011 09:18:04

JB DV-41 SuperNova Digital Vacuum Gauge w/ Case

JB DV-41 SuperNova Digital Vacuum Gauge w/ Case Reviews

Other Picture

JB DV-41 SuperNova Digital Vacuum Gauge w/ Case Feature

• Digital vacuum micron gauge
• Long and flexible cord for hard to reach places
• Alarm is programmable for tasks
• Requires no additional calibration
• Comes with protective carrying case and AC adapter

JB DV-41 SuperNova Digital Vacuum Gauge w/ Case- NEW

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 00:20:03

NSi TES-101 Screwdriver Probe Voltage Tester

NSi TES-101 Screwdriver Probe Voltage Tester Reviews

Other Picture

NSi TES-101 Screwdriver Probe Voltage Tester Feature

• checks 80-250V AC
• no test leads required
• insulated screwdriver tip
• pocket clip

Screwdriver Probe Voltage Tester checks 80-250V AC, no test leads required. Features an insulated screwdriver tip with pocket clip.

Visit Store Now !!

Detail Products

• Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel [Latest HDMI Version Available] - (6 Feet)

Detail Reviews

Sep 11, 2011 11:55:07

Greenlee 5708 GGCI And Circuit Tester

Greenlee 5708 GGCI And Circuit Tester Reviews

Other Picture

Greenlee 5708 GGCI And Circuit Tester Feature

• Checks 120VAC grounded outlets for correct and incorrect wiring
• LED indicators signal correct wiring, open ground, open neutral, open hot, hot/ground reversed, and hot/neutral reversed

5708 Style: Hgt:1", Len.:4", Wth:2" (part# 5708) This item features: -Allows instant testing of GFCI receptacles or GFCI circuit breaker protected circuits. -Checks 120VAC grounded outlets for correct/incorrect wiring. -Indicates whether a GFCI will trip at 3, 5, 7, or 10mA. -Voltage: 120.00 VAC. -Type: 120 VAC Power Plug. -Wt.: 1/2 lb. -Price is for 1 Each.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 09, 2011 19:39:04

Sinometer XB2010L AC/DC 32-range Digital Multimeter with Back-lit LCD Display

Sinometer XB2010L AC/DC 32-range Digital Multimeter with Back-lit LCD Display Reviews

Other Picture

Sinometer XB2010L AC/DC 32-range Digital Multimeter with Back-lit LCD Display Feature

• Fully featured multimeter with high resolution and accuracy
• 3 1/2 digits large back-lit LCD display
• With table stand and protective holster
• AC/DC Voltage/Current, Resistance, Capacitance, Diode Check, Transistor test
• 30 days money back guarantee and 1 year limited warranty

The X&B XB-2010L is a digital Multimeter with high precision and accuracy. It comes with a large back-lit LCD display with a maximum reading of 1,999, easy to read even in the dark. It has many nice features such as Auto power-off, Data hold, Tilt back stand and etc.

Specifications:

Display: Back-lit with a max. reading 1999 counts
DC Voltage: 200mV/2/20/200V ± 0.5%, 1,000V±0.8%
AC Voltage: 2V/20V/200V±0.8%, 700V±1.2%
DC Current: 200uA/2mA/20mA±0.8%, 200mA±1.2%, 10A±2.0%
AC Current: 2mA/20mA ±1.8% 200mA ± 2.0%, 10A±3.0%
Resistance: 200/2K/20K/200K/2Mohm ± 1.0%, 20Mohm ± 1.0%, 200Mohm ± 2.0%
Capacitance: 2n/20n/200n/2u ± 4.0%, 200uF±5.0%
Continuity checking with buzzer (when resistance is less than 50 ohms)
Diode check: Test current 1mA, Test voltage 2.8V
hFE: 1 - 1000
Power source: 6F22 (9V) x 1
Dimensions: 7" X 3 3/4" X 1 3/4"
Weight: 12 Oz (including battery)

Accessories:

Test leads
9V battery (installed)
User manual

Visit Store Now !!

Detail Products

Detail Reviews

Sep 08, 2011 07:55:04

E-Mon D-Mon 208100 Kit Class 2000 3-Phase KWH Meter, 100A, 120/208-240V, 3 or 4 Wire

E-Mon D-Mon 208100 Kit Class 2000 3-Phase KWH Meter, 100A, 120/208-240V, 3 or 4 Wire Reviews

Other Picture

E-Mon D-Mon 208100 Kit Class 2000 3-Phase KWH Meter, 100A, 120/208-240V, 3 or 4 Wire Feature

• Ideal for indoor and outdoor use -- Installation diagnostic indicator
• Monitors multiple loads with one meter for a cumulative reading -- UL Listed; Utility-grade accuracy
• Split-Core sensors included, Soild-Core available
• Phases:3 -- Amps:100A -- Volts:120/208-240V -- Config: Stand Alone -- Wires: 3 or 4 -- CT's included:3

Class 2000 three-phase kWh and kWh/Demand meters are fully electronic, low cost meters for monitoring electrical usage in commercial, industrial or institutional facilities. E-Mon's patented 0-2 volt output split-core current sensors allow for quick and safe installation without power interruption. These sensors also allow for meters to be remotely located up to 2,000 feet from the electrical panel they are monitoring. Multiple sets of sensors can be installed on one meter to provide cumulative usage readings for multiple loads. Class 2000 meters can be supplied in compact MMU Multiple Meter Units for installations where space is at a premium. These meters can also be interfaced with RightEnergyTM software for a complete energy intelligence system monitoring not only Class 2000 meters, but any style E-Mon D-Mon meter or other electric, gas, water and steam meters. Demand option displays kW/Demand and kW Peak date and time (15-minute interval standard, 30-minute interval available).

Visit Store Now !!

Detail Products

Detail Reviews

Sep 07, 2011 10:48:04

GB Electrical GST-55M Voltage-Sensing Wire Stripper

GB Electrical GST-55M Voltage-Sensing Wire Stripper Reviews

Other Picture

GB Electrical GST-55M Voltage-Sensing Wire Stripper Feature

• Gardner Bender
• GST-55M
• Crimpers and Strippers

Circuit Alert NM wire stripper with voltage sensor is 2 tools in 1. Noncontact voltage sensor with visible and audible alerts warns user when voltage is present (50V to 600V AC). Other features include nick resistant double bevel blades, bolt cutting stat

Visit Store Now !!

Detail Products

• Gb Electrical Sdt-15 Screwdriver Tester 6-in-1

Detail Reviews

Sep 06, 2011 02:08:04

Advanced Tool Design Model ATD-5519 Auto-Ranging Digital Multimeter with Protective Holster

Advanced Tool Design Model ATD-5519 Auto-Ranging Digital Multimeter with Protective Holster Reviews

Other Picture

Advanced Tool Design Model ATD-5519 Auto-Ranging Digital Multimeter with Protective Holster Feature

• 10 Meg Ohm input impedence
• 4000 count LCD display

Perfect for all types of electrical troubleshooting. Select Volts, Ohms or Amps and meter automatically selects proper test range. Features include data hold, continuity beeper, range select, auto power-off, fuse and overload protection.

Visit Store Now !!

Detail Products

• Samsung WIS09ABGN LinkStick Wireless LAN Adapter

Detail Reviews

Sep 05, 2011 07:03:04

BK Precision 4001A 4 MHz Function Generator

BK Precision 4001A 4 MHz Function Generator Reviews

Other Picture

BK Precision 4001A 4 MHz Function Generator Feature

• 0.5 Hz to 4 MHz Frequency Range
• Sine, Triangle & Square waveforms
• 20 Vpp output into open circuit (10 Vpp into 50 Ohms)
• TTL Output <30nS
• Voltage Control Generator (VCG) input

100% DC offset -- 4 MHz Function Generator -- Variable amplitude output plus 20 dB attenuator

Visit Store Now !!

Detail Products

Detail Reviews

Sep 04, 2011 01:45:03

Teledyne Thermal Wire Stripper Stripall, Temp Control, w/TBM

Teledyne Thermal Wire Stripper Stripall, Temp Control, w/TBM Reviews

Other Picture

Teledyne Thermal Wire Stripper Stripall, Temp Control, w/TBM Feature

• Handheld unit with solid state adjustable temperature control
• Blades heat 2 seconds and cools instantly
• Controller mounts at electrical outlet
• Accommodates high and low melt insulations on 10 to 36 AWG
• Removes a variety of insulation types up to 1.5"

Same handheld unit with solid state adjustable temperature control. Blades heat from 100 to 1700 Degrees F in 2 seconds and cools instantly. Controller mounts at electrical outlet. Accommodates high and low melt insulations on 10 to 36 AWG. Great for Teflon, Kapton, Kynar, Nylon, Vinyl and more. Removes a variety of insulation types up to 1.5", from single, multi-strand and shielded wire. (Stand Included). USA 117 VAC

Visit Store Now !!

Detail Products

Detail Reviews

Sep 02, 2011 22:32:04

ByteBrothers TVR10/100/1000K LAN Tester, Toner/Probe

ByteBrothers TVR10/100/1000K LAN Tester, Toner/Probe Reviews

Other Picture

ByteBrothers TVR10/100/1000K LAN Tester, Toner/Probe Feature

• Instantly display
• Performs 4 critical tests -- Lights quickly tell if the device is a hub/switch or a PC
• Reads the link pulse to determine if the device is capable of 10, 100 and/or 1000MB/s communication also displays whether it's half or full duplex
• Test and trace coax cables with the two RJ45/coax adapters
• Use it as a Tone Generator (The main unit generates the tone for use by the Remote probe)

LAN TESTER TONER/PROBE

Visit Store Now !!

Detail Products

Detail Reviews

Sep 01, 2011 22:46:03